B888-2PA-N52 - Neodymium Block Magnet - 1/2" Len x 1/2" Wid x 1/2" Thi

• Dimensions: 1/2" x 1/2" x 1/2" (- 0.125" hole)
                         Hole parallel to magnetization direction
• Tolerances: ±0.004" x ±0.004" x ±0.004"
• Material: NdFeB, Grade N52
• Plating/Coating: Ni-Cu-Ni (Nickel)
• Magnetization Direction: Thru Thickness
• Weight: 0.482 oz. (13.67 g)
• Pull Force, Case 1: 21.32 lbs
• Pull Force, Case 2: 23.41 lbs
• Surface Field: 5934 Gauss
• Max Operating Temp: 176ºF (80ºC)
• Brmax: 14,800 Gauss
• BHmax: 52 MGOe

These 1/2" cubes are designed to be used with our B888-2PE-N52 cubes to create Halbach Arrays. The holes are sized to allow a 1/8" rod to pass through, which will hold the magnets in alignment in two dimensons, allowing easier assembly. Threaded rod can be used, which will allow nuts on each end to provide the clamping force needed, or plain rod can be used with any other clamping force.

Check out our Halbach Array article to see these magnets in action!

	Pull Force, Case 1 vs. distance: Magnet to a Steel Plate.
	Pull Force, Case 2 vs. distance: Between 2 Steel Plates.
	Pull Force, Case 3 vs. distance: Magnet to Magnet.
	Pull Force, Case 4 vs. distance: Magnet to Magnet Repulsion.
	View B-H curves for this magnet.

	Click this link to download a PDF Specification Sheet.
	Click this link to download a PDF drawing of this product.
	Click this link to download a Certificate of Compliance for this product.
	Click this link to download a RoHS Statement of Compliance for this product.
	Click this link to download a Material Safety Data Sheet (MSDS) for this product.
	Click this link to download a Conflict Minerals Reporting Template (CMRT).
	Click this link to download a Certificate of Origin for this product.
	Click this link for a REACH compliance statement.
	Click this link to download a .STEP file (3D model).
	Click this link to download an .IGS file (3D model).

   Download the free Adobe Acrobat Reader