Description
Technical
Downloads
Video
- Dimensions: 3/4" dia. x 0.075" thick, with 1 1/2" square plastic
- Tolerances: �0.004" x �0.004"
- Material: NdFeB, Grade N38
- Plating/Coating: Ni-Cu-Ni (Nickel) + Plastic Cover
- Magnetization Direction: Axial (Poles on Flat Ends)
- Weight: 0.331 oz. (9.37 g) per pair
- Pull Force, Case 1: 3.97 lbs
- Max Operating Temp: 176�F (80�C)
- Brmax: 12,600 Gauss
- BHmax: 38 MGOe
For items that are frequently washed, we recommend the plastic cover included on this magnet, which helps protect it from moisture. For items that are infrequently washed, our SW-M is the same magnet without the plastic cover. Machine wash cold, dry on low heat.
Choose your size based on the thickness of all material layers between the magnets in your application. A pull force between 1 and 3 pounds is a good target, though the desired strength does depend on the application. This magnet is great for a total material thickness of 0.02" to 1/8".
The table below shows the expected strength when used with a variety of materials. The Pull Force assumes the magnets are separated by two layers of the fabric.
Material | Fabric thickness, single layer [in] | Pull Force [lb] | Comments |
Cotton T-shirt | 0.012 | 2.89 | Firm pull |
Denim/jeans | 0.028 | 1.81 | Good pull |
Canvas | 0.04 | 1.37 | Good pull |
Leather, 1/16" thick | 0.0625 | 0.88 | Light pull |
Leather, 1/8" thick | 0.125 | 0.36 | Gentle pull |
![]() | Pull Force, Case 3 vs. distance: Magnet to Magnet. |
![]() | Click this link for a depiction of the magnetic field. |
![]() | Click this link to download a PDF drawing of this product. |
![]() | Click this link to download a Certificate of Compliance for this product. |
![]() | Click this link to download a RoHS Statement of Compliance for this product. |
![]() | Click this link to download a Material Safety Data Sheet (MSDS) for this product. |
![]() | Click this link to download a Certificate of Origin for this product. |
![]() | Click this link for a REACH compliance statement. |
![]() | Click this link to download a .STEP file (3D model). |
![]() | Click this link to download an .IGS file (3D model). |
![Get adobe reader icon](images/get_adobe_reader.gif)